Shantinath sales

Automatic Control Electric Blanket With Memory Programming

Timer – The user can set the time after which the blanket will switch off just like an AC. The user can set the time in the range of 60 minutes to 480 minutes, gap of 60 minutes.

Temperature Setting -The user can set the desired temperature digitally in the range of 24 oC to 60 oC temperature just like operating an AC.

Automatic feature-

The automatic feature is designed to conserve the energy. The blanket turns off automatically as it reaches the set temperature and begins heating again as the temperature falls. This feature also enables the blanket to shut down after the set time duration.

MEMORY PROGRAMMING – If due to power failure the blanket loses power during use, the blanket will save its last settings.  It will resume its heating operations as set by the user before the power went off as if there were no interruptions!

  • NEWSLEEPING CONCEPT a revolutionary way.
  • Most Convenient and economical way of keeping a person warm
  • Useful for Arthritics/Old Age Pains.
  • LED Indicator for Clear Viewing.
  • Even Distribution of Heat.
  • Water Proof Element Teflon Coated  for complete protection
  • Complete insulated on either side for complete safety and comfort.

Our product A-One Winter Care Electric Blanket were carefully designed to provide uniform and gentle warmth. It is a perfect night-time companion during intolerable cold winter nights. It will provide long term cost efficient comfort. This product is highly recommended for elders with old-age pains and people with aches and pains.

SIZE

Power consumption per hour

SIZE

Power consumption per hour

30” x 60”

75 watt

60” x 60” Dual Control

150 watt

36” x 60”

90 watt

72” x 60” Dual Control

180 watt

45” x 60”

110 watt

72” x 60” Automatic

170 watt

36” x 72”

110 watt

72” x 75” Automatic

190 watt

The productsare exclusively designed for warming of the bed, taking 20-25 minutes to reach optimum temperature. The blankets operate on 220-250 VAC, 50-60 Hz

Guidelines:

The Digital control is designed to notify you in case there is some problem with your heating product.The controller notifies you by displaying “Er” on the display. In such a case, follow the following steps:

  1. Check the blanket is well connected with the controller
  2. Switch off/on the power supply again
  3. Check that the system is well connected to the plug socket in the wall.
  4. If the problem persists, contact the seller (information is given at the end of this card)

If you do not see power LED after switching on,try switching the controller on ON/OFF twice. If the controller still does not work contact the seller.